High Definition Links
HOME
PRODUCTS
AWARDS
Proscenium Turntable
Reference Phono Amp
Precision Motor Drive
Prelude Record Cleaner
Velocitor
Valid Points
Ultra Vivid
High Definition Links
E-SST/SST
Talisman
Red Rock Amps
Amp Stands
Silent Source Cables
PRICE LIST
CONTACT US/OTHER

 

 

Go To Reviews and Customer Comments

 

                 The desire for continuous improvement and unbridled curiosity 

                                   have led to the next generation of HDLs.     

                                                                 

Reference High Definition Links

the next generation of HDLs

 

With the discovery of a new silver capacitor (which is modified to our

and using special parts developed for our Reference  Phono Amplifier,  

we've created the new Reference HDLs.                 

 

They are fully shielded; all wiring and spades are ultra-pure silver. The Reference HDLS are subjected to a slow-immersion cryogenic treatment and then matched to .05 percent pairs. The results are absolute phenomenal. 

You will never know what your system can sound like until you try them. 

 

See High Definition Links page for more information.   HDLs Mark IIIs also available. See more

 

Application Tip: For high-end surround sound video systems, use Reference HDLs on the main speakers and the new Mark IIIs on the surround speakers. The results are absolutely remarkable. You'll feel like you've stepped into the action!

 

You will never know what your system can sound like until you try them! 

High Definitions Links prevent very high frequency electronic noises (which are emitted from all electronics) and RFI from being transmitted to your speakers.  They eliminate the unwanted noise from the signal path, while allowing the pure music signal to pass through unaffected. 

The music will become more natural sounding.  The electronic glare will disappear.  The sound stage will open up to become better focused, more transparent.  Harmonics will be cleaner, clearer and the dynamics will be faster and sharper, without harshness.  

 

High Definition Links MARK III

 

The new High Definition Mark IIIs are a major improvement over the Mark IIs and we believe even better than the Ultimate HDLs. 

(Ultimate HDLs have been discontinued and replaced by new Reference HDLs.)

We believe you will be as

All parts in the High Definition Links are designed and built to proprietary specifications for Walker Audio.  The wiring and the spade connectors are ultra pure silver.  The components are encased in a wood enclosure to protect the components and minimize the dielectric effect and are shielded with special EMI/RFI conductive copper tape.  

APPLICATION TIP:

HDLs are great to use on high-end surround sound video systems. We recommend using the Reference HDL on the main speakers and the new HDL Mark IIIs on the surround speakers. The results are absolutely remarkable. You will feel as if you are part of the action!

 

INSTALLATION: Please read carefully.  Correct installation is critical.

Installation is very simple.  High Definition Links install in parallel with your speaker cables at your speakers and are placed between the speaker cables and the binding post nut.  (Not between the speaker cable and the speaker.)  

It is important to note the polarity: red to red, black to black.  Do not let the copper body come in contact with the speaker cables or the binding post.  If necessary, use paper tape – not electrical tape- to isolate the HDL body from the bare binding post.  It will sound best if you position the HDL so that the leads extend up or down from the binding posts and the body is as far away from the binding posts as possible.

 

IMPORTANT NEW FINDING:

HDLs will sound best if you position the HDL so that the leads extend up or down from the binding posts with the lead side of the spade facing the speaker and the body as far away from the binding posts as possible.

 

HDLs come with instructions and diagrams for bi-wired speakers with and without jumpers.

Biwireable Speakers – Using one set of speaker cables with jumpers:  You will need one pair of HDLs and one pair of jumpers. The jumper wire is critical. We recommend our Walker Audio Silver Jumpers. They are cryogenically-treated ultra-pure silver solid-core jumpers. Your ears will love you.   

Biwired and Tri-wired Speakers:  One HDL required for each speaker cable.

Speakers With External Crossovers: If possible, install at the speaker.

Subwoofers:  Benefit dramatically.

That’s it.  Allow twenty hours play time for the High Definition Links to break in properly.  

GUARANTEE

The High Definition Links come with a two-year parts and labor warranty against defects. 

If you do not believe the High Definition Links are effective on your system, return them in original condition within 30 days for a full refund of your purchase price.

 

Walker Audio

www.walkeraudio.com

lloydwalkeraudio@aol.com

610-666-6087

Copyright 2000-2008

Walker Audio, Inc.

All rights reserved.