Find
the 4-ounce Mixing Bottle. Find the two scoops. One is marked .25. The
other is .50.
For
cleaning a few records, five to ten:
Use the small scoop. Add a rounded scoop full of enzyme powder into the
empty Mixing Bottle. Using the 16 oz. Ultra Pure Water Bottle, fill the
4 oz bottle to the level A.
Replace
the top on the bottle and shake vigorously.
This will cause some foaming, which is normal.
For
cleaning more than ten records:
Use the larger scoop. Add a rounded scoop full of enzyme powder into the
empty Mixing Bottle. Using the 16 oz. Ultra Pure Water Bottle, fill the
4 oz bottle to the level B.
Replace
the top on the bottle and shake vigorously. This will cause some
foaming, which is normal.
Use
the Active Enzyme Cleaner
Apply
the enzyme solution to the record surface with a fine non-abrasive
brush. Thoroughly wet the record. For best results, let the record sit
15 to 60 seconds. Do not let the solution dry on the record. Lightly
scrub with brush, then vacuum off.
STEP
TWO
Use
the Pre-Mixed Cleaning Solution
Apply
the Pre-mixed cleaning solution to the record surface with a fine
non-abrasive brush. Thoroughly wet the record. For best results, let the
record sit 10 to no more than 60 seconds. Do not let the solution dry on
the record. Lightly scrub and then vacuum off.
STEP
THREE
Rinse
Rinse
the record using the Ultra Pure Water in the 16-ounce bottle. Apply
water to the record with a clean brush and vacuum off. Apply the Ultra
Pure Water a second time and vacuum again. You are now ready to play
your record. When the 16-ounce Ultra Pure Water bottle is empty, refill
it from the 64-ounce bottle.
SUBSEQUENT
CLEANING:
After
the initial cleaning with the Active Enzymes (Step 1), you will usually
only use the Pre-mixed Cleaning Solution and Ultra Pure Water to clean
and rinse your record (Steps 2 and 3).
If after the initial cleaning, the record is only dusty and not
dirty, simply rinse with Ultra Pure Water. After using Prelude, do not
treat the record with any other solution. We recommend the Prelude
Recording Cleaning Brushes (available soon) for use with your vacuum
record-cleaning machine.
BEFORE
PLAYING
We
do not recommend using a de-static/lint brush on the record before
playing. We do recommend
you use a de-static product like the Talisman or Z-stat. Of course, we
prefer the Talisman. It is easy to use, requires no electricity, is
hand-held and lasts forever. If you choose to use a de-static/lint
brush, use the Talisman after the brush. The Talisman also works on CDs,
SACDs and DVDs.
CAUTION
Prelude
solutions contain small percentages of surfactants and alcohol. Use at
your own risk.
They
are nontoxic, biodegradable and nonflammable. If you get it in your
eyes, flush with water.
If
ingested, do not induce vomiting. Drink several glasses of water.
FOR
CLEANING CDs
We
highly recommend that you treat CDs, SACDs, and DVDs with our Ultra
Vivid. Ultra Vivid cleans and optically enhances the discs. You will not
believe how good digital can sound until you actually hear the music as
it was recorded instead of the error correction system’s interpolation
of it. The improvement is
amazing. For best performance, do not use green or black markers on the
disc or put a green mat on top of your disc.
Used
in combination with the Talisman, the effect is doubled. Please call us
if you have any questions about the Prelude Record Cleaning System,
Ultra Vivid CD/DVD Enhancer, Talisman or any other products. We will be
happy to assist you.