| |
Go
To Reviews and Customer Comments
Velocitor
SS in Jatoba
on
matching Dedicated Stand
with
Silent Source power cord |
The
Velocitor “SS” is named for the E-SST Extreme Super
Silver Treatment and the Silent
Source wire used in it construction. It is designed and built
for the best sound and video reproduction possible.
We
employ a deep cryogenic process to treat the
Silent Source wire and IECs and use Synergistic Research Tesla
outlets. The IECs are also subjected to the Tesla treatment.
E-SST
is applied to all the connections in the AC power path and the
connections are screw terminated.
No solder is used in the power wiring. We use a parallel noise
detection circuit to remove noise and assist the power delivery.
The Velocitor will not limit dynamics. In fact,
dynamics will be improved. With cleaner, faster power, you will notice
a much larger, open soundstage with faster dynamics and a natural
presentation filled with details you never heard before. The grit,
grain and glare disappear and harmonics hang in the air as never
before.
If
used on video, expect a much improved, more realistic picture with
richer colors and more depth perspective so that the action takes
places in a more real sense of space.
|
| We
do not incorporate anything that would degrade the sound. We
have found with other power line conditioners we’ve tried that there
is always a trade-off. The
noise floor may be lowered, but usually at the expense of the dynamics
and/or loss of information. In
the Velocitor, we incorporate nothing in the power path to alter the
power supplied. There is no
on/off switch, L.E.D.s, fuses, surge suppressors, transformers, chokes,
filters, bells, or whistles. Just your music - at its best.
Description:
Available
in Jatoba or Maple
with a tung oil finish. Size: 10
x 7 x 7 3/4 in.
Available
with six
or two outlets, convenient external ground, IEC connector for custom
power cord. Height
measured with Valid Points on discs.
Dedicated stand is optional.
Note:
When comparing the Velocitor to other line conditioners, always unplug
the other as it will interfere with the Velocitor’s performance. Also,
when testing another, unplug the Velocitor because it will actually
improve the results you get with the other one. The
Velocitor requires approximately one hour to warm up after being
unplugged.
|
VELOCITOR
SS Power Line Enhancer -
comes with Valid Points and three resonance control discs. Does not
include power cord. We recommend:
|
$3,750.00
|
Dedicated
Stand - Matching
jatoba or hard maple butcher block stand fitted with Valid Points;
includes one resonance control disc
|
$500.00
|
| Matching
Tesla Wall Outlet |
$100.00 |
|
Matching
Silent
Source Signature Power Cord (rated 15 amps)
Signature
Power Cord
Music
Reference Power Cord
|
$999.00
$1,600.00 |
|
